Knowledge of Charging Sockets and Power Banks
Jul 26, 2021
Q: What is smart power strip
A: Smart power strips are a power-saving power strip. Some high-end energy-saving power strips not only save electricity, but also protect electrical appliances. They protect electrical appliances, mainly because they have the function of removing electrical waste. Some also add anti-lightning, anti-short circuit, anti-overload, anti-leakage functions, and eliminate functions such as electrical pulses generated when switching power supplies or electrical appliances.
Q: How to use the overload protection button of the power strip?
A: When the total power of the plugged device is overloaded, the small black button will pop up, and the power plug will terminate the power supply. Press the button, plug it in again, you can use it normally
Q: What does the surge protection on the power strip mean? What is the specific function?
A: If you meet a surge or lightning strike, the surge current or lightning current is absorbed instantaneously inside to protect the electrical equipment
How to switch modes of orico S1?
Answer: Mode switching: Double-click twice to turn off the usb output. Long press the switch to turn on or off the lighting mode, and press it again in the lighting mode to turn on the SOS mode.
Q: Can the power bank be taken on the plane?
A: The power bank that is greater than or equal to 100W cannot be boarded - the power bank below 20000ma can only be used.
Q: The power bank is rated at 1w, but how can it be only 6500 mA?
A: There is loss during the charging process, and the 3.7v of the power bank battery should be converted to the output 5v, so there will be a conversion rate problem between the actual capacity and the rated capacity. So the actual output is 6500 mA.
Q: Does the power bank have fast charging?
A: ORICO K series mobile power interface
enter:
Micro USB: Support 5V/ 9V (QC3.0/2.0)
Type-C IN: Support 5V/ 9V (FCP, AFC, SFCP)
Output:
USB interface (yellow rubber core): Support 7 protocol fast charge (QC3.0 QC2.0 FCP Apple BC1.2 PE2.0/1.1 AFC)
USB interface (black/white rubber core): supports up to 5V 3A output (this interface also supports PE, charging Meizu and other mobile phones can also be fast charging, but not publicity)
Type-C OUT: Support 7 protocol fast charge (QC3.0 QC2.0 FCP Apple BC1.2 PE2.0/1.1 AFC)
Note:
1. Type-C IN and Type-C OUT are the same interface;
2. When charging two or more peripherals, the interface voltage becomes 5V, and the total output current does not exceed 3A.
Q: The charging port of the power bank has a peculiar smell, or the appearance of the power bank is faulty,
or Where does the power bank have its own problems?
A: The peculiar smell is normal, and the power bank will be a little bit more or less. If there is a problem with the appearance or itself, the customer will be guaranteed according to the actual situation
Leave a Reply